www.rfm.com e-mail: info@rfm.com page 1 of 4 ?2008 by rf monolithics, inc. SF2069A-2 - 7/25/08 electrical characteristics electrical connections characteristic sym notes min typ max units center frequency ( @ 25c ) f c 1 95.9 96.0 96.1 mhz minimum insertion loss 14 15 db 1 db bandwidth 5.00 5.60 mhz 15 db bandwidth 7.50 8.00 mhz passband variation (in 1db bandwidth) 0.5 1.0 db p-p phase linearity (fc 1.92 mhz) 5.2 8 deg p-p group delay variation (in 1 db bandwidth) 50 80 ns p-p absolute delay 1.4 3 us change in absolute delay (from unit to unit) -10 010ns absolute delay variation (from -40c to 55c) 8 15 ns rejection (40 to 87 mhz) 43 48 db rejection (111 to 150 mhz) 43 48 db source and load impedance 50 temperature coefficient -20 ppm/c ambient temperature 25 c case style smp-53-s 13.3 x 6.5 mm nominal footprint lid symbolization (yy = year, ww = week, d=day) rfm SF2069A-2 yywwd connection terminals port 1 input 1 port 2 output 6 case ground 2, 3, 4, 5, 7, 8, 9,10 ? low insertion loss ? hermetic 13.3 x 6.5 mm surface-mount case ? complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +10 dbm max. dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c max. soldering profile 265c for 10 s 96.0 mhz saw filter SF2069A-2 smp53-s 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation from fc il. rejection in final user application is dependent on pcb layout and external impedance matching design. see application note no. 42 for details. 4. part to part absolute delay measurement records the absolute delay mean across 2 db passband. 5. "lrip" or "l" after the part number indicates "low rate initial production" and "eng" or "e" indicates "engineering prototype s.? 6. the design, manufacturing process, and specifications of this filter are subject to change. 7. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 8. us and international patents may apply. pb caution: electrostatic sensitive device . observe precautions for handling. notes:
www.rfm.com e-mail: info@rfm.com page 2 of 4 ?2008 by rf monolithics, inc. SF2069A-2 - 7/25/08 SF2069A-2 demo s11 s22 100 nh 68 pf 10 pf 150 nh 56 pf 12345 6 7 8 9 10 ind, 1008, 100nh 501-0782-101 l1 ind, 1008, 150nh 501-0782-151 l2 cap, 0805, 68pf 501-1275-680 c1 cap, 0805, 10pf 501-1275-100 c2 cap, 0805, 56pf 501-1275-560 c3 ch1 s11 1 u fs centr 96 . 000 mhz span 40 . 000 mhz cor prm ch2 s21 log 10 db/ ref -14 db center 96 . 000 000 mhz span 40 . 000 000 mhz cor prm ch3 s22 1 u fs centr 96 . 000 mhz span 40 . 000 mhz cor 19 mar 2008 12:24:24 1 1 : 48 . 145 20 . 344 33 . 727 nh 96 . 000 000 mhz 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 mhz ref=1 ch2 markers bw : 5 . 700334 mhz cent : 96 . 069100 mhz q: 16 . 853 1_ loss : -13 . 343 db 1 1 : 53 . 998 31 . 836 52 . 780 nh 96 . 000 000 mhz SF2069A-2 demo 3 full full
www.rfm.com e-mail: info@rfm.com page 3 of 4 ?2008 by rf monolithics, inc. SF2069A-2 - 7/25/08 ch1 s21 del 100 ns/ ref 1.4 us cor smo prm ch2 s21 log 1 db/ ref -14 db center 96 . 000 000 mhz span 20 . 000 000 mhz cor prm 19 mar 2008 12:24:37 1 2 2 : 19 . 821 ns 3 . 840 000 mhz ref=1 ch1 markers mean : 1 . 3950 us s . dev : 7 . 5710 ns p-p : 36 . 240 ns 1 2 2 : - . 37820 db 3 . 840 000 mhz ref=1 ch2 markers mean : -13 . 551 db s . dev : . 09970 db p-p : . 48310 db SF2069A-2 demo 3 resp resp
www.rfm.com e-mail: info@rfm.com page 4 of 4 ?2008 by rf monolithics, inc. SF2069A-2 - 7/25/08 smp-53-s case case dimensions electrical connections dimension mm inches min nom max min nom max a 13.3 .524 b 6.5 .256 c 2.00 .078 d 2.3 .091 e 1.91 .075 f 1.02 .040 g 1.0 0.039 connection terminals port 1 hot 1 port 1 gnd return 10 port 2 hot 6 port 2 gnd return 5 case ground all others single ended operation return is ground differential operation return is hot 10-terminal ceramic surface-mount case 13.3 x 6.5 mm nominal footprint b a top view bottom view g
|
